ADSL dial-up Subscriber Boot slow problem resolution

ADSL dial-up User Boot Slow, this is also a common problem, there are many people encounter such problems, and the solution is actually very simple.

This is the issue of boot DHCP looking for gateways and DNS. Let's talk about it. Our machine and modem direct connection is the formation of a virtual local area network. At this point, DHCP will look for him. By default, the system automatically obtains an IP address through DHCP. It always takes a while to find a gateway and DNS. So it will cause slow boot.

You can do that. Point start-Settings-network connection-Local Area connection then on the local connection point attribute-internet Protocol (TCP/IP) → attribute, dot use the following IP address, IP address that column fill: 192.168.1.2; Subnet mask click Automatically out. The default gateway fills in: 192.168.1.1, that manually set DNS is not required. That's ok!. Click OK to reboot and try again. There will be no more problems like this, as shown in Figure 1.

Figure 1 TCP/IP settings