Also large self-learning Network device command line

The exclusive pseudonym is also large, the general name of the game.

1, first: according to their own needs in the work, for the convenience of opening the network adapter, enter the command line to open the network connection: Ncpa.cpl. Main purpose to view the current network connection, modify the network IP address and other operations.

2, second: To consolidate the next H3C Device network command line:

CTRL + Z Enter the H3C command to configure the device

<>: User view mode;

[]: System view mode;

System: Enter the systems mode;

Quit: Exit the current mode;

[]sysname 1#nyl_1f: Name what floor several floors;

Display this: view the current configuration;

Intgi0/0/0,ip Add 192.168.1.2 24: Enter interface, configure IP address:

?: Help;

？ : What commands can be added to the rear;

Tab: Fill command;

Dis IP int Brief: View interface summary information (display physical interface, protocol interface, IP information);

Ping Ip: See if the configuration interface is interoperable;

Undo shut down: Activate port;

Undo command: Delete configuration command (requires access to interface to undo);

Physical up: Physical status up physical layer cable is plugged in and power up;

Protocol up: Protocol up, three layer up,ip, mask address configuration is correct;

Display current-configration (dis cu): Displays all current configurations;

This article from the "7732617" blog, reproduced please contact the author!

Also large self-learning Network device command line