An error is reported when Wireshark is enabled when tcpdump is used to capture and store files.

Pcap: file has 186435570-byte packet, bigger than maximum of 65535

Solution: Set the transmission mode to binary.

When using TFTP for Transmission

TFTP> connect 192.168.1.1

TFTP>?
Commands may be abbreviated. commands are:

Connect connect to remote TFTP
Mode Set File Transfer Mode
Put Send File
Get receive file
Quit exit TFTP
Verbose toggle verbose mode
Trace toggle packet Tracing
Status show current status
Binary set mode to octet
ASCII set mode to netascii
Rexmt set per-packet Retransmission timeout
Timeout set total Retransmission timeout
? Print help information
TFTP> Binary

TFTP> put ddns. pcap

Sent 15460 bytes in 0.0 seconds

This article is from the "Linux basics" blog, please be sure to keep this source http://chaoyuezhangsan.blog.51cto.com/7176886/1774246

An error is reported when Wireshark is enabled when tcpdump is used to capture and store files.