Analysis and solution of blue screen code 0X000000F4

Computer knowledge

Analysis of blue screen code 0X000000F4

A 0X000000F4 problem occurs on a computer that is configured to be dependent on a hard disk with Windows XP or later operating system installed and no other device is connected to the same IDE controller channel (primary or secondary channel). At the same time, if you install the system and the motherboard is not compatible, then the computer will also appear this phenomenon of blue screen.

Second, the blue screen code 0X000000F4 solution

1. For Parallel Advanced Technology attachment (PATA) hard drive, configure the disk drive to be used only as the primary drive. For serial Advanced Technology attachment (SATA) hard drive, connect the hard drive cable to the main channel SATA connector on the motherboard.

2, connect another to do the main drive equipment, such as Figure CD drive or DVD.

3, replace the PATA and SATA IDE cable, even if it does not appear to wear.

4. Install Windows on a new hard drive, because your hard disk or Windows installation may be corrupted.

According to the above situation for specific analysis, and then according to the specific situation to solve it.