Analysis of Tenda tei6608s router Internet access settings

Tengda tei6608s vro has been introduced to you before, and today we are trying to better understand the Tenda tei6608s vro and the connection methods. Recently, many netizens have been asking about the Tenda tei6608s router.

Follow the instructions to connect the cables. The default IP address of the route is 192.168.1.1 or 192.168.0.1. Set your local IP address first. Method: Right-click "Network Neighbor" on the desktop and select "attribute ", in the pop-up window, double-click to open "Local Connection", click "properties" in the pop-up window, and then find "Internet protocol TCP/IP )", double-click the "Internet protocol TCP/IP) properties" window;

In this window, select "Use the following IP Address" and enter the IP address 192 in the corresponding position. 168. 1. XX range 2-254), subnet mask: 255. 255. 255. 0. Default Gateway: 192. 168. 1. 1. "OK" twice after filling in;

 

Tenda tei6608s Router

Open IE, enter 192. 168. 1. 1. 1 in the address bar, and press Enter. Normally, a dialog box asking for the user name and password appears. The default password and user name are admin. When you enter the vro management interface, a page similar to "setting wizard" appears. You can cancel the operation and enter the vro management interface, in the left-side Navigation Pane, choose "Network Parameters"> "WAN Port Settings", and configure the working mode of the router's Internet-oriented WAN port. This is the most important step;

Assume that your broadband access method is ADSL PPPoE, select "WAN port connection type" as "PPPoE", and enter "Internet account" and "Internet password ", if you are a monthly subscription user, select "Automatic Connection" and click "save" to complete the configuration; after the password is saved, several more passwords will be entered in the "Internet password" box. This is dedicated to the Tenda tei6608s router for security;

Click "running status" in the left column of the management interface. On the "WAN port properties" page, the corresponding IP address subnet mask, default gateway DNS server, and other addresses are not displayed at the beginning, after the corresponding information appears for these addresses, enter the DNS server address in the "Internet protocol TCP/IP" attribute page in the DNS server address box, all right, the basic settings of the Tenda tei6608s router are complete. If there is no major problem, you can surf!

If you cannot find the address of the DNS server, you can also: When you do not need to route the Internet, in the Start menu -- run, enter, cmd press ENTER; in the dos window that appears, enter: ipconfig/all contains a line starting with DNS in the parameter that appears, followed by two or one IP addresses. Write down the line and enter it in the DNS server address in the IP attribute of your local machine!