Analysis on non-Ghost non-optical drive installation xp

1. Preparations! One USB flash drive, old Mao Tao windowsPE, the original windows XP image, and UltraISOPE disc image V9.3.3.2685. Here, it indicates that if you have installed a system and want to reinstall the system, you only need to prepare the materials for the original windows XP image and the UltraISOPE disc image V9.3.3.2685. Www.2cto.com. For new machines that have not yet installed the system, you need a USB flash drive, old Mao Tao windowsPE, the original windows XP image. 2. Install the system for the new machine first! Use another machine to create a USB flash drive, that is, to create a windows PE. Plug in the USB flash drive to start the machine and enter windows PE. First, use the built-in partitioning tool to partition the hard disk and use NTFS format for the partition (for security and later system optimization ), copy the image file on the USB flash disk to a non-C disk on the hard disk. Note: Change the hard disk mode to IDE before entering windows PE to be recognized by windows PE. After partitioning, start the integrated virtual optical drive for windows PE to load the original windows XP image. In this case, the installation and selection page appears. Select "Install windows XP", select "advanced new installation", accept the protocol, next, enter your system key, and next. Remember that this is the key and advanced option, these two options should be selected, especially the first one. Otherwise, after the restart, the CD disc will be inserted to the slave node. We use the virtual optical drive, and it will fail after the restart. (Copy all the installation files from the installation CD and select "installation drive letter" and "disk partition" during installation ). At this time, you must dial your USB flash drive and then click Next. Otherwise, the file will be copied to your USB flash drive, and of course it will fail. (If the USB flash drive is unplugged, an error will be reported. Re-choose the installation interface, select to install windows XP and run the command again ). Then, select whether to skip this step and continue to install Windows. Www.2cto.com started to copy files to drive C. After copying the files, restart the system and use the light disk. After copying the file, you may not be able to restart it. You only need to manually force the restart. Select Start-close the computer-restart ". 3. If you want to change the system, you need to start the UltraISOPE disc image to create v9.3.2685 and select a tool to load the virtual optical drive (Note: here we mainly want to use the UltraISOPE virtual optical drive, you can also install a virtual optical drive or download a mini virtual optical drive.) load the original windows XP image. In this case, the installation and selection page appears. Select "Install windows XP", select "advanced new installation", accept the protocol, next, enter your system key, and next. Remember that this is the key and advanced option, these two options should be selected, especially the first one. Otherwise, after the restart, the CD disc will be inserted to the slave node. We use the virtual optical drive, and it will fail after the restart. (Copy all the installation files from the installation CD and select "installation drive letter" and "disk partition" during installation ).
Next, select whether to skip this step to continue Windows installation.
Copy the file to drive C. After copying the file, restart the file. After copying the file, you may not be able to restart it. You only need to manually force the restart. Select Start-close the computer-restart ". Of course, this method is also feasible for fixing the system! Author: Japan kN