AppScan Large Site Segmentation scan

Large web site scanning will appear in the back, large sites scanning time is too long. However, if you want to scan a large site in a short time, so that you can do a split scan, a large site divided into a number of smaller and then scan segmentation.

There are two ways to split the scan: (both can get the scan results in a short time, and the report is more readable)

Ps, you need to save a copy of the original scan file (explore file).

First, by test Type

1. Load Scan file .

2. Open Scan Configuration .

3. Select Test → Test Strategy .

4. further restricting and customizing test strategies "type".

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/42/51/wKiom1PXPuzyas_1AAEpX8iNP9U823.jpg "style=" float: none; "title=" 1.png "alt=" Wkiom1pxpuzyas_1aaepx8inp9u823.jpg "/>

5. only tick "infrastructure".

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/42/51/wKioL1PXQAaR8w2cAACrZ4wO0Fs876.jpg "title=" 2.png " Style= "Float:none;" alt= "wkiol1pxqaar8w2caacrz4wo0fs876.jpg"/>

6. Click OK to save the modified configuration.

7. Save the scan file as such as " 1.Scan , start the scan.

8. Reload Original scan file .

9. to open the Scan configuration dialog, repeat steps 3 above , 4 , only tick "application" in the type.

one, Save the scan file as such as " 2.Scan "When both parts are scanned, a complete scan is done.

Second, distribution by Application logic

1. Load Scan file .

2. View your Web application to see if it is logically distributed by itself .

3. from the application tree on the left, select the node that you do not want to test, right-click and select " Exclude from Scan ".

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/42/51/wKioL1PXQAijmi_AAAERe97kU2Q102.jpg "title=" 3.png " Style= "Float:none;" alt= "wkiol1pxqaijmi_aaaere97ku2q102.jpg"/>

4, re-save as 1.Scan and start scanning.

5. reload the original scan file and repeat the process for the node in the Web site that requires a scan test , you can re-save the scan (depending on the specific circumstances of the scanned files).

Ps, path and sweep depth in scan configuration → explore → explore option settings, which can be set to improve scan efficiency.

This article is from the "Cloud Light" blog, make sure to keep this source http://8339205.blog.51cto.com/8329205/1532170