Causes and solutions of common error codes for the NetEase UU accelerator

Source: Internet
Author: User
Tags error code


Here are the common error codes and solutions for using UU, in order to be able to solve the problem faster, when you encounter the error code, please check the local system configuration, such as the system time is accurate, network connectivity, firewall configuration, security software deployment, the background is the use of bandwidth-consuming programs, etc. If you encounter other error code, please contact us in time oh.



Error code 400



Problem reason: Pro, the authentication code loses the wrong



Solution: Complete and correctly enter the verification code you received, you understand!



Error code 402



Problem Reason: Authentication expiration



WORKAROUND: Re-operate authentication



Error code 406



Problem reason: No verification code has been entered for more than half an hour, causing the Authenticode to expire



WORKAROUND: Re-operate authentication



Error code 407



Problem reason: Get Authenticode too often



Solution: Rest, rest



Error code 408



Problem reason: Input phone number format error



Solution: Please enter the 11-digit mobile phone number in mainland China, such as 13888888888



Error code 10001 or-1



Problem reason: Automatic acceleration failure, all acceleration protocols are blocked



Solution: Need specific acceleration log to judge, please click on the main interface of the "quick Feedback" portal to submit the question, we will receive your acceleration log synchronously. UU accelerated Mode 4 after commissioning the line can be a large extent to solve the problem.



Error code 30001 or negative



Problem Reason:



1, virtual network card installation failed;



2, the virtual network card during the installation process was rejected (figure)



Workaround:



If you are due to prohibit the installation of virtual network card caused by the acceleration problem, please exit the UU reload, and then restart the acceleration, or will continue to pop-up prompts to install the Virtual Network Card window, this time please point "yes" or "still continue" oh.



If this is not the case, try the following:



1, through the UU client interface to the upper right corner of the option-repair tool-Uninstall the virtual network card to uninstall the virtual network card, if the problem is still not resolved please refer to the 2nd solution



2, delete computer-Properties-Device Manager-network adapters with * and # Number of redundant virtual network card (as shown)



Remember to check "Show hidden Devices" in the "View" column of Device Manager Oh, or you can't see the virtual NIC.



Error code 50001



Delete Computer-Properties-Device Manager-Network adapter with * and # Number of redundant virtual network card, remember in the Device Manager in the "View" bar check "Show hidden Devices" Oh, or not see the virtual network card.



Error code 4000*



Speeds up the node that avoids mode four



Error codes 619, 628, 651, 678, 692, 789, 809, 638, 807



Problem reason: The expedited protocol is sealed



Solution: Try to change the node several times, or avoid the node of mode one and mode two



Error code 691



Problem reason: Accelerated server/Password Authentication failure, more common in the simultaneous landing in multiple computers



Solution: Close UU and wait a short time to login again, remember to submit feedback Ah, we will try to reduce the probability of this kind of occurrence



Error code 711



Problem reason: System services remoteaccess Connection Manager, Secure Socket Tunneling Protocol service and telephony not open, more than off



Solution: 1. In the "optimization acceleration" inside the two services to restore the start; 2. Start both services with mail in system services



Error code 756



Problem reason: Manually switching or shutting down the process during an accelerated connection, starting UU again may occur



Workaround: Restart the computer



Error code 20001



Problem reason: Accelerated protocol protocol abnormally disconnected, or local network environment is unstable



WORKAROUND: Avoid the nodes of mode one and mode two



Error code 5



Problem reason: Accelerated module acceleration failure; system time error



Workaround:



1, manual selection mode one and mode two nodes to accelerate



2, through the main interface of the "fast Feedback" portal submitted under the issue;



Error code 7 or 28



Problem reason: Local network uplink is too slow



Solution: Try more, try a few more times



Note : More wonderful tutorials Please pay attention to the triple computer Tutorials Section


Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.