CentOS Linux Solution Device eth0 does not seem to be present

After deploying the Linux host via OVF, prompt ringing up interface Eth0:device eth0 does not seem to be present,delaying initialization.

Workaround:

First, open the/etc/udev/rules.d/70-persistent-net.rules content as shown in the following example:

# vi/etc/udev/rules.d/70-persistent-net.rules
# This file is automatically generated by the/lib/udev/write_net_ Rules
# program, run by the Persistent-net-generator.rules rules file.
#
# can modify it, as long as you keep each rule to a single
# line, and the change is only the value of the Name= key.
# PCI Device 0x1022:0x2000 (pcnet32)
subsystem==" net ", action==" Add ", drivers=="? * ", attr{address}==" 00:0c:29:8f:89:9
7", attr{type}== "1", kernel== "eth*", name= "eth0"
# PCI device 0x1022:0x2000 (Pcnet32)
subsystem== "NET", action== "Add", drivers== "? *", attr{address}== "00:0c:29:50:bd:1
7", attr{type}== "1", KERNEL = = "eth*", name= "eth1 "

Record the MAC address of the eth1 Nic 00:0c:29:50:bd:17

Next, open the/etc/sysconfig/network-scripts/ifcfg-eth0

# Vi/etc/sysconfig/network-scripts/ifcfg-eth0

Change device= "eth0" to Device= "eth1",
Change the hwaddr= "00:0c:29:8f:89:97" to the MAC address above hwaddr= "00:0c:29:50:bd:17"

Finally, restart the network

# Service Network Restart
Or

#/etc/init.d/network Restart

It's normal.

If you feel uncomfortable showing eth1, first delete the above line and then modify eht1 to Eth0

From: http://www.linuxidc.com/Linux/2012-12/76248.htm

CentOS Linux Solution Device eth0 does not seem to be present