China Unicom super warship w910 root cannot access the Internet solution

The super warship w910root of China Unicom cannot access the Internet. The following is the root method:
Super warship w910 root method:

1. On the computer install "brush Genie" (http://www.shuame.com/), in the phone "menu" -- "system settings" -- "Developer options" -- select "USB debugging", and connect to the computer with USB cable, install the driver;
2. Click "Enter fastboot mode" in the "utility" of the flash brush genie. The mobile phone will automatically restart to fastboot mode;
3. Do not unplug the data line. In the extract and decompress "boot. Bat" and "xda" to the C root directory, click "boot. Bat". A batch processing window is displayed;
4. Follow the prompts to press any key to fl the boot file and then restart the mobile phone;
5. After the phone restarts, click the "root unlock" function in the "utility;
6. Super warship w910 root succeeded.

Related Files online shared: Super warship root http://www.kuaipan.cn/file/id_3036679317514364.htm

The super warship w910root of China Unicom cannot access the Internet.

Solution:

Both the Access Point ipvnet and 3gwap have tried and won't succeed. Finally, I will flash the machine again.

Http://www.haier.com/cn/services_supports/qwxz/

Download:

W910 mobile phone 32958 version update

Super warship w910 mobile phone 32958 version update

After downloading the package, place the upgrade package on the sdcard. Then restart the host key + volume down to go to the flash screen,

Five options
1. Reboot system now (reboot and exit recovery mode)
2. Apply update from external storage (update the OTA package in the SD card)
3. Wipe data/factory reset (CLEAR user data, including/cache and/data)
4. Wipe cache partition (clear temporary data stored in/cache)
5. Apply update from cache (update/OTA package in cache)

After you select apply update from external storage, the SD card content will be displayed,

Fl. Failed. Error: Error in/tmp/sideload/package.zip. The problem may be solved only when the underlying layer is flushed.

Card swiping method, direct Rom swiping method, so the information in my hands cannot be obtained.

The final solution is to use wire brush:

First, prepare the wire brush package for the super warship.
The procedure is as follows:
1. Install the driver
When a super warship is started, it connects to the computer through the USB data cable and enables the drive letter to install the driver.

2. decompress the wire brush package and open the Upgrade Program.
Decompress the upgrade package, open the folder, and run fastboot_dl_all.bat. Then shut down.

3. The mobile phone enters fastboot mode and connects to the computer to start upgrading.
When the mobile phone is shut down, press and hold down the volume key and insert the USB data cable for a long time. The blue light is on and the above operations are completed correctly in fastboot mode. After the driver is installed, the system starts to automatically upgrade, wait until the PC window disappears after the upgrade, and the warship restarts automatically.

Check the version number. if the version number is correct, the upgrade is successful. We recommend that you reset the phone number after the upgrade.