Cisco switch password cracking

Restart the switch, press the mode key

Switch:flash_init

Switch:dir Flash:

Switch:rename Flash:config.text Flash:config.old

Switch:boot

Would to enter the initial configuration dialog? [Yes/no]: N
switch>en

Switch>enable
Switch#dir

Directory of flash:/

2-RWX 1915 Mar 1 1993 00:07:55 +00:00 Private-config.text
3-RWX 804 Mar 1 1993 01:55:43 +00:00 Vlan.dat
4-RWX 2344 Mar 1 1993 00:07:55 +00:00 Config.old
5-RWX 3096 Mar 1 1993 00:07:55 +00:00 Multiple-fs
6 drwx 192 Mar 1 1993 00:07:12 +00:00 C2960-lanbasek9-mz.122-44.se6

Switch#rename Flash:config.old Flash:config.text
Destination filename [config.text]?

Switch#copy Flash:config.text System:running-config
Destination filename [running-config]?

Sw1#sh Run

SW1 (config) #no enable secret

SW1 (config) #no enable password

Sw1#write
Building configuration ...
[OK]
Sw1#reload

Loading "Flash:c2960-lanbasek9-mz.122-44.se6/[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Ion saved to NVRAM
Sw1>

This article is from the "Guolinux" blog, make sure to keep this source http://guolinux.blog.51cto.com/8485939/1584702

Cisco switch password cracking