Common Switch configuration commands

System-view: Enter the system view mode.
Sysname: device name.
Display current-configuration: current configuration.
Display saved-configuration: used to display the configuration file of the Ethernet switch in Flash.
Save: used to save the current configuration file to Flash.
Reset: Used to erase the configuration file of the Ethernet switch in Flash.
Language-mode Chinese | English: switch between Chinese and English.
Interface Ethernet 1/0/1: Enter the Ethernet port view.
Port link-type Access | Trunk | Hybrid: Set the port Access mode.
Undo shutdonw: Enable the Ethernet port.
Clear down: Disable the Ethernet port.
Quit: exit the current view mode.
Vlan 10: Create VLAN 10 and enter the view mode of VLAN 10.
Port access vlan 10: add the current port to vlan 10 in port mode.
Port E1/0/2 to E1/0/5: add the specified port to the current VLAN in vlan mode.
Port trunk permit vlan all: Allow all VLANs to pass through.
Reboot: Used to reset the motherboard. In fact, it is to restart the switch.

Author: "popular grass"