Configurations related to accessing the Internet through wireless Routing

The specific scenarios are as follows:

In the company, you can directly plug in a network cable to access the Internet. Now you need to add a wireless route within the company. Some computers can access the Internet wirelessly.

The procedure is as follows:

The network cable that comes out of the company switch (that is, the network cable connected to our computer) is directly connected to the WAN port of the wireless route (this is required ), then go to the wireless route (you can directly use the network cable to connect the computer and the wireless router for configuration), set, find the static IP settings option, set the same IP address as our wired Internet, for example:

192.168.0.222

255.255.255.0

192.168.0.1

 

Then enter the wireless network settings. the IP address of the wireless route can be set to 192.168.2.1. Do not use the same IP address as the gateway of the wired router. Then, enable DHCP and set the IP address range, note that it is 192.168.2.100-192.168.2.200.

 

All of the above is done.