Crack Telecom detection, break through multi-user shared Internet patch package download

TP tplink-402 upgrade package
◆ Note: To ensure the upgrade is successful, disconnect the WAN port and connections not required by other LANs before the upgrade ◆

① Decompress the package in the same directory, which contains several files. These files must be placed in the same folder.

Run the tftp.exe file in double-click mode (do not close this file after running ).Program)

③ Enter the vro management interface, "System Tools"> "software upgrade", enter the IP address of your computer in "TFTP Server IP Address", and click upgrade.

★★★★How to obtain the IP address of a computer (Win2000/XP): click "start-Run" on the computer, Enter cmd, and enter the doscommand prompt, and then enter ipconfig/All, you can see your IP address)

④ The upgrade takes about 80 seconds. After the upgrade is successful, the router will be restored to the factory settings (the IP address is 192.168.0.1, and the user name and password are both admin). You need to reset the router to access the Internet.

⑤ If you cannot enter the vro management interface after the upgrade is completed, perform the following steps: restart the computer and vro, you can also enter ipconfig/release and ipconfig/renew at the doscommand prompt to obtain the IP address again.
I have passed the test. Attach texture

If you cannot connect to the vro after refreshing the image, follow these steps:

1. disconnect the power supply for about 30 seconds. Hold down the reset button (a small port behind the router, you can press it with a dingtalk) and plug in the power until M1, m2 two lights flash at the same time (about 10 seconds)
2. Type 192.168.1.1 in the browser and the management page appears. Set the parameters according to the local bandwidth settings.
3. OK. You can access the Internet.

Install ipcrackinstall.rar on a single host