TP tplink-402 Upgrade Pack
Note that to ensure a successful upgrade, disconnect the WAN port and unwanted connections from other LANs before upgrading
① the pieces in the same directory, contains a few files, these files must be placed in the same folder.
② Double-click to run the Tftp.exe file directly (do not close this program after running)
③ then enter the router management interface, "System Tools"-"Software Upgrades", "TFTP server IP" to fill in the IP address of their own computer, click the upgrade can be.
★★★★ Computer IP Address acquisition method (WIN2000/XP): Click on the Computer "start-run", enter CMD, a DOS command prompt, and then enter Ipconfig/all, you can see their IP address (addresses)
④ upgrade time of about 80 seconds, after the successful upgrade, the router will be restored to the factory settings (IP 192.168 0.1, username and password are admin), you need to reset the router to the Internet.
⑤ If you are unable to enter the router management interface after the upgrade completes, try the following steps: Restart your computer and router, or regain the IP address by typing ipconfig/release and ipconfig/renew at a DOS command prompt.
After I test, completely through. Attach Map
After the brush, not connected to the router, please use the following methods to handle
1, disconnect power 30 seconds or so, first hold down the reset button (the router behind a small mouth, you can use Iron nails hold) while plugging in the power, until the m1,m2 two lights at the same time fast flashing (about 10 seconds)
2. Then in the browser type: 192.168.1.1, the Management page appears, set according to the local broadband settings parameters.
3.ok, you can surf the Internet.
Shareipcrackinstall.rar installed on a single machine
