D-Link DI-624 + A wireless router WIFI settings

The use of D-LINK is becoming more and more popular, so for some new network, how should we connect to the wireless router, how should we set the wireless router, here is for us to reveal.

Connect to a wireless router]

1. The order of connecting to a wireless router is as follows:

Internet (adsl/gehua broadband) → broadband cat → wireless router → computer

2. Pay attention to the use of the network cable during connection

A straight line (two RJ45 connectors have the same line arrangement order)

A cross Line (the order on both sides is different)

The rule is "the same device has different lines, the same line for different devices", that is, the cat to the router uses a cross line, and the router to the computer is a direct line.

However, because most routers and switches can automatically identify the network type, I will not repeat it here. This is because there is no chance of a problem.

3. the indoor effective range of the wireless router is 100 meters, but this is only the ideal value. If the distance is 20 meters, the signal passing through the wall will definitely affect, just as the signal from the toilet will be weaker, because the wall of the toilet has a water layer. I also heard that the network will be disconnected immediately when a microwave oven is opened, but I have never tried it.

Set a Wireless Router]

The default IP address of the wireless router is 192.168.0.1. Open IE or my computer and enter the IP address of the router in the address bar to enter the logon screen. The default administrator username is admin and the password is blank. Use the "setting wizard" to quickly and conveniently set up a vro. Click "online setting wizard" to start the setting wizard.

1. Set your new password

Nothing to say

2. Select Your Time Zone

Nothing to say

3. Set Internet connection

Because the bandwidth type of the household is different, the setting will be different.

If you are an Internet user such as ADSL, you should enter the PPPoE setting interface and enter the PPPoE account and password, in this case, the "set Dynamic IP Address" interface will appear. Fill in according to the bandwidth type of your students.

4. Set wireless connection

Four fields are left empty.

Wireless Network ID (SSID): name your own wireless network. It is better to use the default name.

Channel: The default value is Channel 6, which does not need to be changed unless otherwise specified. I used 6, but now it's okay to change it to 7.

WEP Security Mode: adds a password to your wireless network. Here, you can select the password switch or the complexity of the password after it is enabled. If you don't want your wireless network to be stolen by your brother next door, add a password. If you select 64Bit, you need to enter a 10-bit password, 26 for bit, and 64Bit is enough.

WEP password: Enter at least 10 passwords.

5. reactivate

The settings are complete.

Some Supplements]

Manual IP Address Allocation

The default DHCP address of the router is automatically assigned to your computer and NDS. As for the addition of gehua broadband, DHCP settings can automatically or manually assign normal WIFI to NDS, but I still assign a static IP to my NDS, because some students say that dynamic issues sometimes occur, the method is as follows: Start NDS and enter a game that supports WIFI, such as carriage, select WIFI settings, and search for hotspots, at this time, go to the "system status"-"Wireless User List" on the vro settings page to view the Nintendo DS. Go back to the "Homepage"-"DHCP ", you can see your NDS in the drop-down menu of the DHCP Client below, after you click Copy next to it, your NIC address, domain name, and automatically assigned IP address will be automatically filled in, you can change your preferred IP address (within the range of the DHCP server you set). Do not forget to select "Activate" above, and then click "execute" to display "reactivate ", click to continue. After the configuration is successful, it will be displayed in the static DHCP user list. There should be a check box in the front. Otherwise, it indicates that it is not activated. You can click the text and pen icon on the right to reactivate it.

Basically, 624 + A can easily connect to WIFI

Wifi a & Q]

Q: No hotspot (AP) found)

A: The Wireless network function may be disabled in the router settings, and the Wireless in "Homepage"-"Wireless network" is activated. Or your router is not connected at all. Just check whether your computer can access the Internet.

Q: I found the AP, but I couldn't test it, and I couldn't play the WIFI game. The error 52100 was reported.

A: If you are occasionally 52100 busy with the network, it is usually because you have A problem with the WIFI settings in NDS. You can select all options automatically, however, you can also manually fill in the IP/subnet mask/DNS. The IP address depends on the quantity assigned by DHCP. The subnet mask is 255.255.255.0, And the DNS and gateway point to the IP address of your router. The default value is 192.168.0.1. In addition, a 52100 error occurred a few days ago, and the IP address/DNS modification was invalid. Finally, the problem was solved by clearing the wifi code of the machine in NDS. However, my friend code has changed. Fortunately, although I changed the friend code, I did not lose my score in WIFI.

It seems that there are no other problems. If you encounter any problems when using a vro to connect to WIFI, you can find the reasons for these problems first. You can't solve them any more, because this is the case, if you ask someone else, they will answer the same question.