DB120-WG-Ruijie Certification

I use the version of the OpenWrt is 20120201 after I have tested many times can be used!
1. Configure on the Web
Enter 192.168.1.1 on the Web page for router configuration (login password defaults to admin)
Click: After network interface, select Modify under Wan port to enter the following interface

Enter the appropriate IP address and DNS

Click Advanced Settings to change the MAC address to the MAC address of your computer's local connection
Then click Save and apply

Back to the management interface click: Services--Campus network certification to configure
Remember that DHCP to choose not to use otherwise authentication is unsuccessful!
Then click Save and apply

Enter router configuration with SECURECRT
1. Use VI to see if the contents of Mentohust and network under/etc/config are the same as those configured on the Web page.
2. Modify the/etc/init.d/mentohust permissions and add executable permissions to it: chmod 744 mentohust (chmod u+x mentohust) This step is critical

3. Configure mentohust.conf in Terminal input mentohust (this file/etc/mentohust.conf)
Open/etc/mentohust.conf with VI

Then, Mentohust is certified at the terminal input.
enjoy!

DB120-WG-Ruijie Certification