Detailed process of Dual-system installation of WIN7 ora 18 on WIN7 Hard Disk

Software Used in the dual-system detailed process of installing Fedora 18 on WIN7 Hard Disk: ext2fsd (read and write EXT3 partition), easybcd (dual-system boot), Acronis Disk Director (partition software), please refer to: 1. create a 5g EXT3 partition, use EXT2FSD to load the EXT3 partition, and then upload the Iso ora 18 DVD Iso file. 2. install easybcd, select Add new entry, select NeoGrub, select install, select configuration, and edit menu. lst, add: title Install Fedora Linux 18 root (hd0, 0) kernel/nst/vmlinuz repo = hd:/dev/sda10:/initrd/nst/initrd. img extracts vmlinuz and initrd from the isolinux directory of the DVD ora 18 dvd iso file. img files are stored in the WIN7 system partition/NST. (Modify sda10 to your own 5Gext3 partition) 3. Create a 20g partition to install the Fedora system file and create a swap partition. 4. Restart Fedora and choose not to install the boot program. 5. set menu. change lst to: title Fedora Linux 18 root (hd0, 0) kernel/nst/vmlinuz root =/dev/sda8 ro initrd/nst/initrd. img (modify sda8 to your own Fedora system partition) 6. restart, WIN7, Fedora, and dual systems. For cainiao, see: 1. Download the Fedora 18 DVD. Because the DVD is larger than 4 GB, it can only be placed in the NTFS partition. 2. use the partitioning software (I use Acronis Disk ctor) to adjust a new 5g EXT3 partition from the idle partition to put the Fedora 18 DVD, because the Fedora boot program cannot recognize NTFS. 3. Download ext2fsd (this software can read and write ext3 partitions in windows) and install it. Run Ext2 Volume Manager. because it is the first time, you must enable the driver, select Tools and settings, select the configuration file system driver, and click Enable. Select the 5g EXT3 partition, right-click, select change assembly point drive letter, select load and exit. In this case, a new drive letter appears in the computer, and then copy the fedora 18 dvd to the root directory of the new loaded partition. After copying the ISO file, you can detach the ext2fsd file. 4. Create a 20 GB partition to install the Fedora system file and create a swap partition swap, which is required by the linux system. 5. install easybcd, select Add new entry, select NeoGrub, select install, select configuration, and edit menu. lst, add: title Install Fedora Linux 18 root (hd0, 0) kernel/nst/vmlinuz repo = hd:/dev/sda10:/initrd/nst/initrd. img (sda10) is my hard Disk, which can be viewed by Acronis Disk Director. The C Disk is sda1, the D Disk is sda5 (not sda2), and the E Disk is sda6, change sda10 to the 5g partition where the ISO file is stored .) 6. Extract vmlinuz and initrd. img files from the isolinux directory of the DVD ora 18 dvd iso file and put them under the WIN7 system partition/NST. (You can use the virtual optical drive DAEMON Tools Lite to load the ISO file.) 7. restart the system, select the NeoGrub boot loader, and select Install Fedora Linux 18 to start the installation process. during installation, select not to install the boot program. Otherwise, Windows 7 cannot start. 9. after installation. change lst to title Fedora Linux 18 root (hd0, 0) kernel/nst/vmlinuz root =/dev/sda8 ro initrd/nst/initrd. img (sda8 is my Fedora system partition, also changed to your own partition sdaY, Y is also a number) 10. restart your computer, select the NeoGrub boot loader, and select Fedora Linux 18 to experience Fedora Linux 18. You can also choose to enter WIN7.