Generally, the company uses VE1260, the branch uses VE982, and the Intranet uses a layer-3 switch, which divides VLAN, and establishes a pptp vpn between VE1260 and VE982. After the branch transfers the Intranet VPN to the company, you can access all the CIDR blocks of the company's internal network, including other CIDR blocks under the layer-3 switch. The specific configuration is as follows: 1. The network topology of the Branch and the basic Internet access settings of the company (1) is relatively simple, you can easily access the internet according to the general configuration. (2) ensure that all the computers in the company can access the Internet normally. 2. Configure the VPN Server on the pptp vpn Server, as shown in figure
3. pptp vpn Client configuration (1) configure the VPN Client in the conventional mode
(2) At this time, the branch computer can access the computer in the 192.168.2.0/24 CIDR Block of the Headquarters through the VPN, and further access to the 192.168.1.0/24 CIDR block under the layer-3 switch in the headquarters, you also need to add a static route on the branch router.
With the above configurations of the flying fish star router, you can easily meet your needs. The operation is not too complicated. This article is from