Diagram of removing dust from the Dell thinkm4010 notebook

I don't know if our country is in a time of extreme disaster, but I have a lot of electrical appliances, except the flashlight, it seems to be faulty.

The sound of the fan is very loud during the portable heat dissipation period recently, indicating two problems: the CPU heat dissipation performance decreases and the fan friction is too high.

There is no good way to change the fan friction except for one. Although I suspect that is the main reason (the normal heat dissipation period is very low to accelerate the rotation)

Next I will share with you the process. Of course, the process is the opposite, because it is the first time you have taken a notebook!

If you are dismounting the host, go back and see (* ^__ ^ ......

 

There is a rotation button on the CPU to remove the CPU, but my suggestion is: Do not touch it!

There is also a motherboard battery, pay attention to this circuit board is still with low-voltage direct electricity, it is best to bring dust-proof work gloves, for accurate operation, I do not wear.

 

1. First of all, let us show our leading role. I call her "nurse!

When we go to the hospital and the nurse teaches you to take off your pants and rise your ass, you will say that sentence. Please choose:

A. Miss Nurse, don't do this!

B. Give me a shot, Miss nurse!

No matter which one you choose, it does not affect because this function returns void.

2. Squeeze some heat dissipation silica gel on the CPU and Heat Sink

3. Clean the dust

4. Install the heat sink module and screw it.

5. Screw the fan fixing screw

6. Put the entire circuit board back into the hand-carried body. Here are some important parts.

7. Note that the Display wiring is down. Do not perform any horizontal actions. Otherwise, your world will be dark.

8. Screw the fixed screw, each place has a triangle sign, is relatively small screws, other screws are just the mouth of the plate, but cannot be screwed in

9. Connect the bell cable, which can be directly plugged in.

10. The legendary C-cap and cover are all bayonet designs, and the sound of the odd click is right.

11. The power switch line should be lifted at the same time if it is to be detached. I am not careful about it.

12. MB line, like a snap-on like a window switch, the line will be stuck.

13. The same is true for hard-disk cables. Just when the machine is split, the couple next door are watching <Tang bohu: Qiu Xiang>, just like Qiu Xiang: "force! ", Hero knocked out the left-side stalagmite.

14. Press the keyboard (called "normal wife") and there is a clip above the F1, F6, and print screen keys.

15. In turn, screw the keyboard to fix the screw (the screw points to the place and then goes on)

16. Insert the memory stick (the hero called it "temporary worker") into the card number. If I have money, I need to add one, which is less than 4G. Otherwise, how can it be enough (the desktop 16g is barely enough)

There is an ltk on the seat, which is exactly the same as the abbreviated name of Uncle A. It is a miracle! I hope to hire many temporary workers in the future...

17. The memory cover is a snap-on design. When the battery is facing up, you can open it from left to right. The opposite is true when the battery is up.

18. Just press on and hear the strange bang.

19. Screw the fixing screw

20. Optical Drive ("Kitchen ")

21. Screw the fixed screw of the optical drive

22. Hard drive (the hero called it "Rice cylinder ")

23. Li battery

Then all the screws will be screwed back. The shortest holes are short, and vice versa. In fact, many things in the world are like this, holes in different depths correspond to different nails --!

24. Memory Card ("small ")

25. wireless mouse (" ")

26. Speaker ("lover ")

27. I started Windows 7 and XP, and XP was installed by myself, just like B (I believe that rain, wood, and wood damage my drive)

28. Select XP twice. I will turn off the flashlight.

29. All statuses are normal

30. Go to the desktop. If you are disassembling the machine, you can reverse the process.