Disk.sys blue screen: Safe Mode card in Disk.sys solution

Everyone in the Windows 8 or Linux system retrofitted Windows 7 o'clock will appear cards in the Windows interface being started or secure mode card loading in the Disk.sys interface. Little Knitting today is the installation of Windows 7 after removing partitions using the installation version of the system cannot start: "Starting interface security mode card in Disk.sys"

Normal start the following figure:

In safe mode, as shown:

Most of these problems are due to the fact that the partition format has not been successfully transformed into an MBR format, please back up your data, install the media using the clean installation version, and use the command transformation format.

The workaround is to repartition using the DiskPart tool.

1. Use the Windows 7 CD-ROM or u disk to boot, into the system installation interface;

2. Press SHIFT+F10 or SHIFT+FN+F10 on the interface of the selected partition, and bring up the command prompt;

3. In cmd, enter the following commands in turn, each input line will be pressed to enter;

DiskPart

Select Disk 0

Clean

Convert MBR

Exit

4. Turn off the cmd window, refresh and repartition, and reinstall the system.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer group: 189034526 welcome you to join