Easy wireless router configuration

The development of wireless technology has been well developed, but there are also many problems. To address these problems, improving performance is a matter of time. Let's take a look at how to set up. The development of wireless LAN technology is now very complete, and the speed is getting faster and faster. It has achieved the rate of common wired Ethernet, and the security of wireless signals has also been basically guaranteed. More importantly, wireless networking can be plug-and-play without wiring. Therefore, it is the best choice for residential users of the consumer type. In addition, many of my friends now have bought the Chinese version. It will be a matter of time to buy a wireless router to go home.

But the problem arises. how to configure a vro after it is bought is a matter of concern. In fact, it is very easy to configure a wireless network. Do not think that the problem of having an extra "wireless" character is complicated, configuring a wireless router is similar to configuring a limited vro, but you only need to pay attention to it in a few minutes. Let me show you how to set the keys.

After the AP is bought back, the first thing to do is to set the position. The wireless network speed is significantly affected by distance and obstacles. The AP as the central node should be centered in the physical location, and there is no obstacle between the AP and the space of each house. For example, the AP should be placed in the living room, if it is a duplex structure or Villa, you can consider adding a gain antenna. For details, you can browse the article "enhanced signal does not need to worry, wireless gain antenna purchase Guide" on this site ); in addition, it is also necessary to prevent the AP from being trampled and bumped easily when placed in a corner.

After a proper location is found, the configuration time is reached. Each device that complies with the TCP/IP protocol to access the network has its own IP address, and the wireless router is no exception. Generally, an AP has its own fixed IP address in the LAN. This design also facilitates us to configure and test the wireless router by accessing this IP address. Of course, the IP addresses of wireless routers of different brands are different. For details, refer to the AP manual. In addition, you must make sure that the connected network card is in the same IP address segment. For example, if the IP address of the small-sized Siemens 2624 AP is 192.168.254.254, then the IP address of the network card can be specified as any address on the 192.168.254.XXX network segment.

Currently, many APS support direct browser login configuration. If not, refer to manual settings. Open a Web browser and enter the address of the wireless router in the address bar. At this time, the system requires you to enter the logon password. Generally, the password can be found in the product manual. For a new router that has not been set, some will also display the Setup Wizard ). On pages such as Connection Configuration, we can select the broadband network type. Generally, ADSL selects via PPP over Ethernet, while Cable or FTTB selects via DHCP. If the ISP needs to enter the user name and password, we can enter the corresponding location below and set Timeout to around S. Then, we can set the ESSID default value of the wireless router to WLAN. Do not forget to click the Save button after setting.

If the wireless router needs to connect to a 100/10 M wired network as a wired router, we need to further set up. In the System IP Configuration interface under options such as IP/DHCP, when DHCP is set to Enable, in this way, once you set the TCP/IP attribute of the wired network card and wireless network card to automatically get the IP address, you can get an IP address from the wireless router. As for the dns ip address, you can query the local ISP, which is generally not set.

In addition, friends who like BT will find that the download speed slows down after using the vro. The best solution is port ing, in a vro, you can set the DMZ function for the Intranet IP address of your machine. Note that the BT port number must be consistent with the setting on the vro.