Eclipse Integrated Development Environment Building

Gdbserver Installation:

Install Gdb-server environment variables to be placed in front of the ARM-LINUX-GCC environment, because ARM-LINUX-GCC installation package also has gdb,linux system in the search for instructions from the/ROOT/.BASHRC from the top and down to find instructions

Jlink for Linux Installation

Unzip the installation package is no longer described, the following is the instructions to copy several files

cp-d libjlinkarm.so*/usr/lib-f

CP 45-jlink.rules/etc/udev/rules.d/

Finally, enter the./jlinkgdbserver command to see the following

[Email protected] jlink_linux_v434a]#./jlinkgdbserver
SEGGER j-link GDB Server v4.34a

JLinkARM.dll v4.34a (DLL compiled 31 2011 11:51:40)

Listening on TCP/IP port 2331

J-link connected
Firmware:j-link ARM V8 compiled Jul 17 2014 12:31:18
hardware:v8.00
S/N: 17935099
Feature (s): Rdi,flashdl,flashbp,jflash

J-link found 1 JTAG device, total Irlen = 4
JTAG id:0x0032409d (ARM9)

Description Jlink Installation Succeeded

Eclipse installation

Input which eclipse, you can see where the directory is, this is the default installation of Eclipse, but this eclipse version is not correct, not the version we need, so we have to log off

Decompression installation There is no need to say, but one thing I want to say is that when you start the software, be sure to execute it in the virtual machine terminal./eclipse to properly start the software, and I use

Is SCEURTCRT, where the software always fails to start, this is a small lesson.

Installation of eclipse needs to install a plug-in, plug-in URL: http://opensource.zylin.com/zylincdt, just a plug-in, all the way next, after the switch to restart the software on the line.

To this development environment to build complete!

Eclipse Integrated Development Environment Building