Expert: Network Remote Video Monitoring System Improvement Problems

For more information, see the following section. [I = s] This post was last edited by phone1126 at 2012-1-12 20:50.

System hardware:
1. ARM9.
2. USB camera

System software:
1. Embedded Linux operating system (kernel 2.6)
2. Universal USB camera driver
Use the built-in Linux gspca driver
3. jpeg and SDL Libraries
Supports the basic connection libraries of mjpg-streamer and uvcvideo.
4. Video Server
The mjpg-streamer software package is a video service software that supports V4L2 chips.
5. Client
You can use a web browser or other client programs on a PC.
Run the following command on the terminal: # mjpg-streamer-I "/lib/input_uvc.so"-o "/lib/ouptput_http.so-w 192.168.0.10: 8080"
Run a dedicated client software on the PC to watch the video. In the web browser mode, you can only install java Plug-ins (install JRE: JAVA Runtime Environment in windows) or enter http: // 192.168.0.10: 8080 in the address bar to play the video.
To improve the way to view videos in a web browser: 1. Enter the IP address directly in the browser. You do not need to enter the port number (8080). entering the port number is not universal. This step is complicated.
2. More importantly, you must install the java Plug-in to view the collected video in the browser. Instead of using this plug-in, you can directly use any common browser to view the collected video.
Experts are invited to analyze how to implement it,