flash8.0 drawing exercise: Drawing "pearl" components

(1) "Pearl" components of the production is very simple, the key is the setting of the fill color. Use the Oval tool to draw a positive circle with no fill.

(2) Open the Color Mixer panel with the fill style set to a radial shape. The left color block is set to Gray (#A09696) and moves slightly to the right, and the right color block is light yellow (#F5F0D8), as shown in Figure 2-143.

Figure 2-143 Setting the fill color

(3) Use the "Paint bucket Tool" in the center of the left side of the centre of the mouse click, or click anywhere in the mouse and then use the Fill deformation tool to adjust. As shown in Figure 2-144.

Figure 2-144 Adjusting the fill color

(4) Copy the circle, insert a new layer, and perform the edit | paste to current position command on Layer 2. Change the fill color to the settings shown in Figure 2-145. Style radial, left color block white, right color block light yellow (#F4F1CC), Alpha is 0%.

Figure 2-145 Setting the fill color

The finished pearls are shown in Figure 2-146.

Fig. 2-146 Pearl Effect