CAD open slowly, stuck in 99%

Problem Description

When you open AutoCAD, the software stays on load 99%, clicks on [unresponsive], waits, or forcibly shuts down, and is unusually slow when you normally close CAD.

cause Analysis

Cracked version, not connected to the activation. The CAD default boot requires networking, so it's stuck there. The reason for the hardware is that you have a set of network or wooden cable.

Workaround

method One:

Control Panel--internet Option-Advanced-security--"Check publisher's certificate revocation" is disabled.

Method Two :

Download "Cadmanagercontrol" to copy three files to the CAD installation directory, point to the antenna icon, set disable networking, and then restart.

: Http://byhh.net/f/CAD/1174121745/CADManagerControl.rar

Note

If you are still having slow startup or stuck-up problems, there are words like "Load custom file failed to regenerate model". Indicates that there is a problem with the software installed on AutoCAD and requires that the software be reinstalled or set up.

If you have to wait while you change the font. Card time, CAD to their own directory under the Fonts folder in each font file read it again,

If there are many fonts in the Fonts folder, the CAD is particularly slow. That's the reason.

Many people like to keep a fonts folder with quite a lot of CAD font files, which is the reason to delete useless font files under the Fonts folder. Copying the font files on demand is resolved. There is a similar problem is the use of padding, will also be stuck for a long time, the same reason. CAD in Reading directory C:\Documents and settings\ your username \application Data\autodesk\autocad 200x\r16.2\chs\support\ under Acad.pat And Acadiso.pat These two files are fill pattern files, if very card, is installed other software, modified the two files, make it too bloated.

CAD open slowly, stuck in 99%