cisco2960 and huaweis3900 Configuring cross-network segment Telnet

cisco:2960

Switch (config) #line vty 0 4

Switch (config) # password Cisco

swithc>en

Switch#inter VLAN 1

Switch # IP address 10.88.103.84 255.255.255.0

Switch (config) #IP default--gateway 10.88.103.1 (cross-network segment, without this, cross-network segments cannot telnet)

switch (config) #ip http server (Open web)

huawei:s3900

Huawei>sys

Huawei#user-interface vty 04

Huawei#autherntication-mode Password

huawei# set Autherntication-mode password simple Huawei

Huawei#user Privilege Level 3

Quit

Huawei#interface VLAN 1

Huawei#ip Address 10.88.103.84 255.255.255.0

Huawei#quit

Huawei#ip router-static 0.0.0.0 0.0.0.0 10.88.103.1 (cross-networksegment, without this, cross-section cannot telnet))

Huawei#quit

Huawei>save

This article is from "one van" blog, please be sure to keep this source http://1336014.blog.51cto.com/1326014/1635935

cisco2960 and huaweis3900 Configuring cross-network segment Telnet