Cisco router configuration parameters for China Mobile GPRS and APN applications

China Mobile's GPRS network uses the APN method to connect to the GPRS device terminal and communicate with the server through the APN. The customer purchased the Cisco 2811 router, and the mobile company needed to pull the optical fiber through the E1 port, I spent more than 1000 RMB with an E1 module. mobile companies are doing very poorly, and optical fiber connectors are not provided at all. I also bought a switch for xxrmb, after a successful call, the csico 2881 route configuration parameters are as follows:

Cisco2811 # Show run
Building configuration...

Current configuration: 2808 bytes
!
Version 12.4:
Service timestamps debug datetime msec
Service timestamps log datetime msec
Service password-Encryption
!
Hostname cisco2811
!
Boot-start-marker
Boot-end-marker
!
Logging buffered 51200 warnings
Enable Password 7 111818160018
!
AAA New-Model
!
!
AAA authentication login default local
AAA authorization exec default local
!
AAA session-ID common
!
Resource Policy
!
No network-clock-participant ipate WIC 0
IP subnet-zero
!
!
IP CEF
No ip dhcp use VRF connected
Ip dhcp excluded-address 192.168.253.1 192.168.253.99
Ip dhcp excluded-address 192.168.253.200 192.168.253.255
!
Ip dhcp pool DHCP
Network 192.168.253.0 255.255.255.0
DNS-server XXX. XXX. XX. xx7 XXX. XXX. xx.171
Default-router 192.168.253.254
!
!
No IP domain Lookup
IP domain name yourdomain.com
!
Username admin password 7 044a0a15182b4b5e1b0a1718071f0916
!
!
Controller E1 0/0/0
Channel-group 0 unframed
!
Controller E1 0/0/1
Channel-group 0 unframed
!
!
Interface fastethernet0/0
Description swj_internal_port
IP address 192.168.253.254 255.255.255.0
Ip nat inside
Duplex auto
Speed auto
!
Interface fastethernet0/1
No IP Address
Shutdown
Duplex auto
Speed auto
!
Interface serial0/0/0
Description chinamobile_port
IP address XXX. XXX. xxx.206 255.255.255.252
Ip nat outside
Encapsulation PPP
!
Interface serial0/0/1:0
No IP Address
!
IP classless
IP Route 0.0.0.0 0.0.0.0 XXX. XXX. xxx.205
!
No ip http server
Ip http Authentication local
Ip http timeout-policy idle 60 life 86400 requests 10000
Ip nat pool chinamobilepool XXX. XXX. xxx.206 XXX. XXX. xxx.206 netmask 255.255.252
Ip nat inside source route-map mobile pool chinamobilepool overload
Ip nat inside source static TCP 192.168.253.2 443 XXX. XXX. xxx.206 443 extendable
Ip nat inside source static TCP 192.168.253.1 2006 XXX. XXX. xxx.206 2006 extendable
!
Access-List 1 permit 192.168.253.0 0.0.255
Route-map mobile permit 10
Match ip address 1
Match interface serial0/0/0
!
!
Control-Plane
!
Banner motd ^ C
!
Line con 0
Password 7 071e205f5903
Line aux 0
Line vty 0 4
Privilege level 15
Password 7 140613181b0e
Transport input Telnet
Line vty 5 15
Access-Class 23 in
Privilege level 15
Transport input Telnet
!
Scheduler allocate 20000 1000
!
End

Cisco2811 #

Of course, there is still a lack of APN-related Channel configuration parameters, which have been JB for half a month, and the APN card has not been completed yet. Please send it again after obtaining the APN Channel configuration parameters. In addition, cisco will never be used for routes that do not use cisco, and there is no sense of service at all. I would like to ask what password is required for an E1 module.