Cisco three-layer +TPAC200+TP APS implement each SSID Independent network segment

Equipment: Cisco three layer One

TP AC200 1 Units

TP AP 2 units

Objective: To set up multiple SSID signals, each of which is independent of one network segment, and the terminal obtains IP automatically.

Difficulties encountered: According to TP description AP Port is added to the specified VLAN, while the SSID binding in AC corresponds to vid, but the wireless terminal can not obtain IP.

Set up:

Three-tier VLAN-AC use address set to 192.168.100.254

VLAN 101 WIFI1 using the network segment address set to 192.168.101.254

VLAN 102 WIFI2 using the network segment address set to 192.168.102.254

AC Connection three layer G0/1 AC specified address 192.168.100.251

AP1 connection Three layer G0/2 AP address auto Get

AP2 connection Three layer G03 AP address auto Get

The address pool is set according to the TP description

Address Pool 1

IP DHCP Pool WIFI1

Network 192.168.101.0 255.255.255.0

Dns-server x.x.x.x x.x.x.x

Default-router 192.168.101.254

Option-ASCII Tp-link

Option 138 IP 192.168.100.251

Address Pool 2

IP DHCP Pool wifi2

Network 192.168.102.0 255.255.255.0

Dns-server x.x.x.x x.x.x.x

Default-router 192.168.102.254

Option-ASCII Tp-link

Option 138 IP 192.168.100.251

Three-storey G0/1

Switchport Access VLAN 100

Switchport mode access

Spanning-tree Portfast

G0/2

Switchport Trunk Encapsulation dot1q

Switchport Trunk Native VLAN 101

Switchport trunk allowed VLAN 101,100,102

Switchport mode Trunk

Spanning-tree Portfast

G0/3

Switchport Trunk Encapsulation dot1q

Switchport Trunk Native VLAN 102

Switchport trunk allowed VLAN 102,100,101

Switchport mode Trunk

Spanning-tree Portfast

Cisco three-layer +TPAC200+TP APS implement each SSID Independent network segment