Development Board access to Linux methods

1. Connect the PC and the Development Board to the switch using a network cable.

2. Make sure windows can ping Linux.

2.1. Turn off other network connections in the Windows system, leaving only the network adapters that are used to connect to the switch.

2.2. Network connection-"find the corresponding network-" Right-click Properties-"TCP/IPV 4-> set the IP address of the connection, such as: set to 192.168.1.101

2.3. Turn off Windows Firewall.

2.4. Set up the virtual machine as a bridging mode in VMware.

2.5. Set the Linux IP address, as set to: 192.168.1.106

2.6.window and Linux Ping each other to see if it can pass.

3. Close Selinux,setenforce 0.

4. Set the IP on the board to be on the same network segment as the Windows,linux IP, 192.168.1.102

5. Ping windows and Linux separately on the development Board to see if it will work.

Development Board access to Linux methods