Laptop motherboard temperature is too high to do

Laptop motherboard temperature is too high to do

First of all, or from the most basic and most important fan cooling began. Be sure to ensure that the fan mouth is not dusty, there is dust can be on the computer with a brush brush a few, dust will be blown away with the wind:

If the fan is too dusty, it is recommended to use a dedicated compressed air spray in the shutdown State or open the panel to clean the fan:

Another important issue, if you put your computer on the bed, remember to put a book under the fan to ensure that the fan mouth is not blocked by your trousers:

Generally, the noise should be a lot of computer programs in the running, or the program runs not smooth and so on, resulting in the fan also adjusts the operation to produce high temperature and noise, you should clean up the memory or close some programs and windows:

Of course, it is better to reboot the computer, memory and program cleaning more clean, release the program and memory CPU fan may be lowered to

Additional, is to connect a USB heatsink base, but to note that the more cooling base fan slices, the better the cooling effect, the greater the noise:

You want a better effect, you can add an exhaust ventilation type radiator. Just note that this radiator does not receive the fan outlet, the PCMCIA interface to better effect, otherwise it is blocking the original fan out of the Wind:

If your computer's fan problem is loud and you feel the heat is bad, you can try replacing the fan:

Today's laptop power management software, you should at least "balance mode" to run, otherwise low performance running large programs also easy to produce high temperature: