Nmtui A graphical network configuration tool. In the command terminal input Nmtui can configure the network, relatively simple, but with good after still need to network card configuration file modification, Onboot=yes, is the boot.
Nmcli is a tool for managing your network to view network status and information,
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/99/0C/wKiom1lDWkiS4g_EAAC0brZAHvI132.png "/>
If you need to view information about a network card in detail, you only need to enter the command:nmcli con show nic name
Add one network card, multi-network card can improve the network efficiency, can also be a NIC failure, will not let the network failure
First add a network card, for example, there are already two network cards
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/99/0C/wKioL1lDWkyzKA2fAAAKs4TGMfc095.png "/>
The following set two network cards for the slave card, the main card is bond0
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/99/0C/wKiom1lDWlDBstsPAAAHIl6hGWE511.png "/> # Two slave card settings are similar
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/99/0C/wKioL1lDWleg9hnQAAAGUDmKL8c440.png "/>
Set the main card below
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/99/0C/wKioL1lDWlfDFOopAAAH_H456ro041.png "/>
Allow the kernel to support bonding drivers
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/99/0C/wKiom1lDWleRzb5HAAAClPb4ltw994.png "/>
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/99/0C/wKiom1lDWliCOiy5AAAExBdoGrg035.png "/>
# mode is the drive mode
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/99/0C/wKioL1lDWljjp3OgAABBnjeaJRE203.png "/>
Takes effect after restarting the network
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/99/0C/wKiom1lDWlnQeqXcAAANamlWmCM532.png "/>
This article is from "Deast's Nest" blog, please make sure to keep this source http://xudongdong.blog.51cto.com/1889083/1937413
Linux learning (that's what Linux should learn) 7.1