Settings for the router

1 The telephone line/modem/router/pc the correct link according to the instruction manual

2 ensure a reliable connection between the router and the PC; Open the TCP/IP properties for local Area Connection: Use the following IP, "192. 168. 1. X (0~255) "Default gateway" 255. 255. 255. 0 "The default DNS is then filled in and then determined. (Tl-r400 and tl-r400+ Two the management address of the default is: 192.168.123.254, subnet mask: 255.255.255.0) with a network cable will connect the router LAN port and the computer network card, because the router Ethernet port has a polarity auto-flip function, so whether your network cable using direct or crossover line can be

3 Open IE Browser, choose "Tools" → "internet Options" → "connect" in the menu bar, and if you already have settings in "Dial-up and virtual private network Settings", please delete them all. Select LAN settings, tick the "Automatically Detect Settings" button on this page but do not tick the "Use automatic configuration Script" and "Proxy Server" section

4) Login Router: Enter 192.168.1.1 (some 192.168.0.1) in the Address bar, enter the user name (default) "admin", password "admin", and click "OK" to log into the broadband router. The "Setup Wizard" will pop up after landing, follow the wizard prompts to configure the broadband router (or in the left column menu bar, click "Network Parameters", "Wan port Settings", here to configure the router's Internet-oriented WAN port operating mode). Click "Next" to choose the way you use the Internet: If you are using ADSL dial-up Internet, please select "ADSL Virtual Dial-up (PPPoE), click" Next ", fill in the operator to provide your Internet account and password (please note the case), click" Next "and" done " (The current default mode is "Connect on demand"). Next, select the " running status " of the tree menu on the left side of the broadband router configuration interface, click the " Connect " button on the right side of the refresh window, and after normal connection, you will see that the broadband router obtains the IP address, subnet mask, gateway, DNS servers (2). If you don't see it, try clicking the "Connect" button multiple times. Then, in the local connection settings " re-enter the PC's TCP/IP Properties page, fill in the previous DNS server address in the computer" Internet Protocol (TCP/IP) property page DNS server address box, so that you can get your computer online. If you can not find the address of the DNS server is also possible: Ipconfig/all in the parameters that appear in the beginning of a DNS line, followed by two or an IP address, write down, fill in the IP properties of your native DNS server address!

Automatic IP and static IP:

Automatically get the IP address is assigned to you by the ISP a dynamic IP, a shot to a place, every time the Internet this IP is different, when the router's DHCP function, and then set your two computers IP address to automatically get Static IP is a fixed IP that can set the router to fixed IP when the DHCP function is turned on to automatically IP. The advantages of fixed IP: Fast Start-up connection, reliable network. Easy to manage the network users, in the case of internal and external network coexistence, only the manual IP can range fixed network, for network shared printer, such as the address fixed after restart.

Gateway 0 off (192. 168. 1. 1); 1 segment (192. 168. 10. X

Settings for the router