Static IP configuration record of openSUSE System in Virtual Machine

In a virtual machine, the openSUSE system uses static IP configuration records to connect to the host through NAT.

View VM ip status

View the current ip address range and gateway information.

 

In this way, you can obtain the gateway information and the ip address range that can be set.

Gateway: 192.168.141.2

Ip address range: 192.168.128-254

Use the following command to set the IP address

Linux-6v32:/etc/sysconfig/network # ifconfig eth0 192.168.141.201 netmask 255.255.255.0 up

Linux-6v32:/etc/sysconfig/network # route add default gw 192.168.141.2

Test whether the configuration is successful

Linux-6v32:/etc/sysconfig/network # ping www.baidu.com

PING www.a.shifen.com (115.239.210.26) 56 (84) bytes of data.

64 bytes from 115.239.210.26: icmp_req = 1 ttl = 128 time = 31.2 MS

64 bytes from 115.239.210.26: icmp_req = 2 ttl = 128 time = 35.6 MS

64 bytes from 115.239.210.26: icmp_req = 3 ttl = 128 time = 37.5 MS

Done

It seems so simple. It took my brother nearly a day to do a good job. In the process, I tried a variety of methods to set them. All of them ended in failure... But now we are still successful, and we will not accept the previous exploration.