Step-by-step instructions on vro installation settings

It is helpful to know some knowledge about vro installation and setting. Many people may not know the specific steps of vro installation and setting. After reading this article, you will certainly have a lot of GAINS, I hope this article will teach you more things. Home network devices are changing with the development of the network. How do I set up a router? This is the first step for us to implement surfing on the Internet. Next we will introduce you in detail how to install and configure a vro.

Implementation Process of router installation and setting:

Router installation settings 1

Usually Four 10/100 M vswitches are embedded, which is easy to install. After you apply for a broadband line to access the Internet, the ISP will install the line for you. You only need to connect the incoming line to the WAN interface of the router by connecting the network cable or the LAN port of the ADSLMODEM, connect the LAN interface of the router to the Hub, switch, or computer Nic.

Vro installation 2

Vro supports three common setting methods: PPPOE, dynamic IP, and static IP. Vro is usually a Web-based management page. for users who have no experience in using vrouters, the product is generally provided with detailed instructions to help users fully understand the use and configuration of vrouters. You can easily complete the configuration by using the prompts in the setup wizard.

We need to learn about the relevant parameters from ISP network service providers. For static IP addresses, see the following parameters: static IP addresses, subnet masks, gateways, DNS servers, and backup DNS servers. If it is a dynamic IP Address: You can obtain the IP address from the local server. If you need to manually set the DNS server address, contact your ISP. For PPPOE, see the following parameters: user name and password.

Vro installation 3

Enter the vro address in the instruction manual in IE or other browsers, and enter the user name and password to enter the vro control interface. The address and password of the newly purchased device are described in the Manual. Follow the instructions above. The general IP address is 192.168.1.1, The subnet mask is 255.255.255.0, and the user name and password are both admin.

After obtaining the correct parameter information, go to the vro settings page, follow the prompts in the installation wizard, and enter the corresponding parameters to complete the settings. In general. In this case, we should be able to access the Internet, but this is not the case. This is because of the mac address of the router. We only need to find the mac address clone option and select clone mac address, after saving, you can access the Internet.