USB flash disk boot Summary
Method 1: Use cube to create a USB flash drive.
Tool: Cube software, download link: http://www.tweakcube.com/
1. Open the cube homepage,
2. Click "Activate cube USB flash drive" To Go To The following interface:
3. Select your USB flash disk in the device box, and select your local image in the Image File Path box.
4. Create a USB boot disk.
5. After installation, you only need to specify the USB boot option in the BIOS to enter the USB flash disk installation mode.
Method 2: Use WinSetupFromUSB to create a USB flash drive.
1. Install WinSetupFromUSB.
2. Run WinSetupFromUSB and click HP format tool to format the USB flash disk (this is the limitation of this software. You must format the USB flash disk, but not the cube)
3. After formatting, close the hp usb Disk Storage Tool window, return to the WinSetupFromUSB program window, and click "Browse" to select the path of the XP installation file (for example, the drive letter of the XP installation Disk)
4. Select the correct oneAfter the path of the XP installation file is located, click the "GO" button to start copying the files required for XP installation to the USB flash drive. 5. After the file is copied successfully, the following prompt is displayed:
This article is from the "technology sharing platform" blog