Vswitch remote local configuration tutorial

In the network management work, the Internet cafe Switch configuration must be mastered and skillful. As this is a complicated process, some new network administrators may still lack experience. This document describes how to configure an internet cafe switch.

Different types of switch Console Port location is not the same, the type of the Console port is also different, the vast majority of the use of RJ-45 port, but there are also a few using DB-9 serial port or DB-25 serial port. Next, perform the following steps:

Step 2: power on the computer connected to the vswitch and run Windows 1st or 2008 in the computer.

Step 2: Check whether the HyperTerminal component is installed. If the component is not found in the "Accessories" (Accessories), you can Add the Windows component by adding/RemoveProgram.

Step 2: In the "name" text box, type the name of the connection item for the new super-level terminal. This is mainly for easy identification and there are no special requirements. Here we enter "XXX ", if you want to select a favorite icon for this connection item, you can also select one in the icon bar and click "OK.

Step 2: select the serial port of the computer connected to the vswitch from the "connect to use" drop-down list box.