H3C Firewall L2TP configuration process

H3C firewall L2TP configuration. Model H3C Firewal 100c

A L2TP the local authentication mode configuration.

1.local-user user1

Password cipher 7-czb#/yx]kq=^q ' maf4<1!!

Service-type Telnet Terminal

Level

Interface ethernet0/0

IP address 192.168.1.1 255.255.255.0

Interface ETHERNET0/4

IP address 61.130.130.1 255.255.255.0

Firewall Zone Trust

Add Interface ethernet0/0

Set Priority 85

Firewall Zone Untrust

Add Interface ETHERNET0/4

Add interface virtual-template0//Adding a virtual interface template to a non-secure domain

L2TP enable/enable to l2tp/

Domain system

IP Pool 1 192.168.8.2 192.168.0.100/address assigned to dial-up users/

Local-user UserA/Create a local account to authenticate the user/

Password Simple UserA

Service-type PPP

Interface Virtual-template0

PPP Authentication-mode PAP/PPP authentication mode for PAP, using system Default Domain/

IP address 192.168.8.1 255.255.255.0

Remote address pool 1/Specify to assign addresses to users using IP Pool 1

Interface ETHERNET0/4

IP address 61.130.130.1 255.255.255.0

L2tp-group 1

MANDATORY-LCP/LCP again consultation/

Allow L2TP virtual-template 0/accept any LAC L2TP request and bind to vt0/

Undo Tunnel Authentication/Do not perform tunnel certification/

PC wants to use L2TP dial, the configuration that needs to do