H3C Port mirroring-grab Bag

Before the clutch, H3C different types of equipment command is not the same, just a simple check, from S3100 above, including S36, S55, S75, are the following configuration to grab the package (is to configure a local group, and then configure monitor port and Mirror Port):

# Create a local mirror group.  
<Sysname> system-view
[Sysname] mirroring-group 1 local
# Configure the source port and destination port for the local mirror group.  
[Sysname] mirroring-group 1 mirroring-port Ethernet 1/0/1 Ethernet 1/0/2 both
[Sysname] mirroring-group 1 monitor-port Ethernet 1/0/3
# Displays configuration information for local mirror Group 1.  
[Sysname] display Mirroring-group 1
mirroring-group 1:
type:local
status:active
mirroring Port:
ETHERNET1/0/1 both
ETHERNET1/0/2 both
Monitor PORT:ETHERNET1/0/3
after the configuration is complete, the user can monitor all messages in the Ethernet 1/0/3 .

This article is from the "Jackysz" blog, make sure to keep this source http://jackysz.blog.51cto.com/61/1782986

H3C Port mirroring-grab Bag