H3C SR6604 Upgrade iOS

1. If you use FTP to upload or download iOS, configure the following:
[Wh-6604-2] FTP Ser Enable---enable FTP function
[wh-6604-2] Local-user FTP---Establish user name
[Wh-6604-2-luser-ftp] Password SIM FTP---Configure user name password
[WH-6604-2-LUSER-FTP] Service-type FTP---to this User name service type
[Wh-6604-2-luser-ftp] Authorization-attribute Level 3----Give the user name authorization levels
Retu
#
To the PC open cmd C:\Documents and settings\x200t>cd\---Exit to the root directory
C:\>FTP---into FTP mode
Ftp> Open 1.1.1.1---Log on to the FTP Ser end
ftp> pwd---View current directory
Ftp> cd/---into the root directory of SER, which is the router/directory
ftp> dir---View all files in this directory
ftp> get source file name space D:\aa.bin--download from Ser side to PC (client) machine

Ftp> put d:\aa.bin a new target file name---Uploaded from client to Ser Note: FTP is the TCP protocol, and the current mode used is CS architecture
Ftp> dir---After uploading to verify that the file has been successfully uploaded to the SER side
Ftp> Quit---exit FTP mode

2. First to the router again verify that the version is correctly uploaded to the router
Dir/all in User view
3. If the router has more than one master board, you can directly copy the
Copy Cfa0:/sr6600-cmw520-r2420l08-rpe.bin Slot1#cfa0:/sr6600-cmw520-r2420l08-rpe.bin
Copy from the CFA0 disk in the current master panel to the SLOT1 master panel,
If it fails, plug the electrical port into the next master panel, repeat steps 1, 2

4. Change the boot iOS version file
First look at the current boot iOS file configuration
Dis Boot-loader
Modify the iOS version that was loaded the next time the router was started, under User view:
Boot-loader file Cfa0:/sr6600-cmw520-r2420l08-rpe.bin slot 0 main
Boot-loader file Cfa0:/sr6600-cmw520-r2420l08-rpe.bin slot 0 backup

After inserting the console line into another dashboard, change the command in duplicate
Boot-loader file Cfa0:/sr6600-cmw520-r2420l08-rpe.bin Slot 1 main
Boot-loader file Cfa0:/sr6600-cmw520-r2420l08-rpe.bin Slot 1 backup
View the current boot iOS file configuration again Dis boot-loader Note the file name of the next field


5. Reboot
After the reboot, the boot will find
Extend Bootware Version is not equal,updating? [y/n]
Updating Extend bootware ........ ..... done!
Basic Bootware Version is not equal,updating? [y/n]
Updating Basic bootware .....------... done!
Bootware Updated,system is rebooting now.
This step means to update the Bootware version. Do not hit any keyboard wait or agree to update, will automatically start the route again, after restarting the router,
And the router will automatically load the interface board (Sub-board) after loading, you can verify the upgrade success by Dis ver


All the commands involved.
FTP Ser en
Local-user FTP Password SIM FTP
Auth le 3

Pc:ftp Open 1.1.1.1
PWD/
Dir
Get
Put

Dis Boot-loader Boot-loader ...
Dis ver
Copy

On the router, except FTP in System view, all other commands are in user view in Dis boot-loader note next field

If you want to use TFTP, you can go to the router user view after you start TFTP ser on your PC:
Tftp Get destination file source file or put source file destination file ~

This article is from the "LIHONGWEIBJ" blog, make sure to keep this source http://lihongweibj.blog.51cto.com/6235038/1598397

H3C SR6604 Upgrade iOS