Hard disk active partition (the method of marking the disk partition as active or canceling the activity)

Go: http://www.jb51.net/diannaojichu/55058.html active partition is the computer boot partition, the operating system's boot files are installed in this partition, Windows system is generally default to C drive, and Linux is based on the specific settings

When you start the system, the operating system on the active partition executes a process called a drive image that assigns a drive name to the primary partition and logical drive. All primary partitions are first imaged, while logical drives are specified with subsequent letters.

hard disk active partition definition

In a hard disk, there can be only one active partition.

Method of marking a disk partition as active or canceling activity

The system partition must be a primary partition that has been marked as active for startup and must be on a disk that is accessed by the computer when the system is started. The same disk can have only one active system partition at a time. You can have more than one basic disk, one active partition per disk. However, you can only start the computer from a specified disk. If you need to use a different operating system, you must first mark its system partition as active before restarting the computer.
You cannot mark an existing dynamic volume as active. However, you can convert the basic disk containing the active partition into a dynamic disk. After the disk is converted, the partition becomes the active simple volume. If the active partition is not the current system partition or boot partition, it becomes a simple volume and loses its record in the partition table, so that it is no longer active.
In fact, the active partition is written in the main section of the boot data, it can complete with the BIOS handover start task, such as a series of actions, to guide the system.
The main partition is best only one, otherwise the management will be more troublesome, at present, the small point of the hard disk 10G can, big can consider 15--20g about, too big there is no meaning
mark partition as active partition (32-bit only)
Method 1: Use the Windows interface:
1. In "Run" enter "Compmgmt.msc" (open Computer Management);
2. In the console tree, click Computer Management-storage-disk management;
3. On the partition that needs to be marked as active, click "Right click" and click "Mark Disk partition as active".
Method 2: Use the command line:
1. In "Run", enter "CMD";
2. Then enter "DiskPart";
3. Then enter "list Disk";
4. Then enter "Select Disk 0" For example, we will now make the 1th partition of the 1th hard drive as active;
5. Then enter "list Partition";
6. Then enter "select partition 1";
7. Finally enter "active".
Cancel marking the disk partition as active
You can only have the command line when you cancel, because the Windows interface tab has changed to a lighter color.
1. command line prompt, run DISKPART, run into the prompt into "diskpart>";
2. Use the "LIST Disk" command to determine the # #号 of your mobile hard drive;
3. Use "Select Disk 0" to set your mobile disk as the current operating disk;
4: Use the "LIST PARTITION" command to determine the # #号 of your hard drive partition;
5. Use "Select PARTITION 1" To set the first partition as the current operation partition;
6. Use the "INACTIVE" command to unlock the active state of the current partition.

Hard disk active partition (the method of marking the disk partition as active or canceling activity) (GO)