Hardware preparation: ADSL Wireless Internet sharing settings

A friend asked me to solve the problem of ADSL Wireless Internet sharing settings and asked many people for a satisfactory answer. Below is a similar answer to the question found on the Internet. Considering the actual situation of netizens, I want to allow two laptops to access the Internet wirelessly. Therefore, I suggest the latter solution: ADSL Wireless Internet sharing settings, you just need to replace "SOHO Broadband Router" with "Wireless Broadband Router. Below I will share with you the process of setting up a wireless network for my friends:

ADSL Wireless Internet sharing settings, hardware preparation

In addition to computers, you usually need to buy wireless broadband routers, wireless network adapters, cable crystal headers, and other devices. There are already many articles about online product purchase. If you have any questions, please contact IT168.

Here I would like to introduce some network cable stuff, which is frequently asked by many netizens. Generally, the ADSL Modem device only comes with a direct line of more than 1 m), which is usually enough, that is, it connects to the ADSL Modem and a desktop. However, there are often network friends asking about the difference between the express Connect Line and the cross line.

Below I will give a simple answer to the questions about the configuration of ADSL Wireless Internet sharing: Usually the direct connection is used between network devices, such as the connection between ADSL Modem, vro and UPLINK ports of the vswitch; the crossover is used for the connection between the NIC, The vro switch, and the common port of the vro switch. Now, I think everyone can figure out how many cross lines are needed.

For more information about the production methods and detailed descriptions, see: a comprehensive understanding of the network cable production method. When all the network devices are purchased, we need to start installation! To build a network, start by installing the desktop pci nic:

Install NICs and set TCP/IP

◆ Open the desktop chassis, insert the NIC into the idle PCI slot of the motherboard, and start the computer.

◆ After re-entering Windows, the system will prompt "new hardware found" and attempt to automatically install the NIC Driver; if not, open the "Find new hardware wizard" window and select "Install from list or specified location ". Tip: the Windows system can automatically install drivers for some common NICs, such as Realtek RTL8139 NICs.

 

ADSL Wireless Internet sharing settings

◆ Insert the drive disk of the NIC driver into the drive), you can select "Search for removable media" or "include this position in the search ". Because it is manually installed, select "do not search, I want to select the driver to install ".

 

ADSL Wireless Internet sharing settings

◆ In the following window, the installed compatible device drivers are displayed. Click the "Install from disk" button, and then click "Browse" to select the driver location for installation. After the network card is installed, open "network connection" in "Control Panel", and we will find an additional "Local Connection ".

 

ADSL Wireless Internet sharing settings

◆ To install the corresponding protocol for each computer in the LAN, assuming Windows XP is used), first open the "Network Connection" window, right-click "Local Connection ", select "Properties> General> install", select "protocol", add "NetBEUI protocol", and click "OK" for installation.

◆ Tip: by default, "NetBEUI protocol" is not displayed in the select Network Protocol window ", we can install the "nbf. copy the sys file to the % SYSTEMROOT % \ SYSTEM32 \ DRIVERS \ directory, and then copy "netnbf. copy the inf file to the % SYSTEMROOT % \ INF \ directory.

 

ADSL Wireless Internet sharing settings

◆ Similarly, on the "General" tab, select "Internet protocol TCP/IP)", select "Use the following IP Address" in the Properties window, and enter the IP address, such as 192.168.1.6, of course, it can also be set to 192.168.1.1 ~ Any address between 192.168.1.255. The subnet mask is generally 255.255.255.0. The default gateway can be set as needed. The DNS server address can be the same as the gateway address. Tip: the IP addresses of each computer in the LAN cannot be repeated. Otherwise, a conflict may occur.

 

ADSL Wireless Internet sharing settings

◆ To ensure mutual access between computers in the LAN, you must reset the names of the Working Groups and computers on all computers in the LAN. Press "Win + Pause" to open the "System Properties" window, select the "computer name" tab, click "change" in the lower right corner, and enter a new computer name and working group name, make sure that the computer names in the LAN are different, and set the same working group name. Finally, click "OK" continuously.