(WISP) Internet access
Set the local connection IP address on the computer to"
Automatically obtain the IP address"
1. Right-click"
Network neighbors", Select"
Attribute":
2. Right-click"
Local connection", Select"
Attribute":
3. Double-click"
Internet Protocol (TCP/IP)
4. Select"
Automatically obtain the IP address""
Automatically obtain the DNS server address", OK:
Enter:
192.168.0.1Press the enter key and select"
Wireless Relay"
Click"
Internet settings"-- Select"
Dynamic
IP"-Modify"
Wireless name and password", OK
If the"
Connected", You can browse the web page and surf the Internet.
(Client + ap) accessing the internet
Set the local connection IP address on the computer to"
Automatically obtain the IP address"
1. Right-click"
Network neighbors", Select"
Attribute":
2. Right-click"
Local connection", Select"
Attribute":
3. Double-click"
Internet Protocol (TCP/IP)":
4. Select"
Automatically obtain the IP address""
Automatically obtain the DNS server address", OK:
Enter:
192.168.0.1Press the enter key and click"
Wireless Relay":
Click OK to restart the vro.
After the vro is restarted, connect to the vro1/2/3 interface or connect to the vro wireless signal to check whether the Internet can be accessed normally.
What should I do if I cannot open 192.168.0.1?
For users who use "broadband connection" to dial up the internet, they must disconnect the broadband connection before setting up the router to ensure that the computer is connected to a short Network cable
Any interface of vro1/2 3/4/, and then enter 192.168.0.1 in the IE browser if it is not connected to the Internet.
Please refer to the following steps for troubleshooting:
Method 1: Set the local computer connection to automatically obtain the ip address. Refer to: how to change the ip address of the computer to automatically get it?
Method 2: The connection between the bandwidth and the router is incorrect;
L telephone line access users: when the telephone line is connected to the cat, the cat connects the WAN port of the router (blue interface) and finds a short Network cable, one connection to any 1234 interface of our router (yellow interface) and one connection to a computer;
L directly connect a network cable to a User: directly connect the network cable behind your computer to the WAN port (blue interface) of our router, and then find a short Network cable, one connection to any 1234 interface of our router (yellow interface) and one connection to a computer;
L optical fiber broadband access users: Optical fiber cat connects the network cable of the computer host to the WAN port of the router (blue interface) and finds a short Network cable, one connection to any 1234 interface of our router (yellow interface) and one connection to a computer;
Method 3: Change the browser and log on to the vro interface again. Note that the default logon password is admin;
Method 4: When the vro is powered on, press the Reset hole (Button) next to the vro interface for about 10 seconds to Reset;
Method 5: manually set the local connection IP address to 192.168.0.X (1 <X <254). For details, refer to: how to specify an IP address for the computer?
Method 6: If a dial-up connection pops up in the browser, click "set"-select "never dial-up connection"-"OK" and log on again;
Method 7: If offline work is displayed in the browser, open the browser and select "file"-cancel the check box before "offline work;