If you have multiple routers, you may use a LAN-WAN cascade for networking. How can I remotely manage a vro on the Internet when the vro is used as a secondary router?
This document describes how to remotely log on to and manage vrouters from the Internet.
Note:If a vro is a vro, you need to use the mobile APP to manage the vro. For details, see: how to manage vrouters remotely?
After connecting the line as shown in the preceding figure, set static IP addresses, gateways, and DNS information for the WAN port of your router (secondary router) to ensure that the router is successfully connected to the Internet.
Log on to the vro management page and click
Security features
>
Remote
WEB
Management, Modify the WEB management Port to 9090,
Remote
WEB
Management statusSelect
Enable, Set the remote WEB management IP address to 255.255.255.255 (that is, allow all Internet computers to access the router interface), click
OK. As shown in the following figure:
Note:: After modifying the management port, the intranet computer uses http: // IP: port (for example, http: // 192.168.1.1: 9090) for management.
Set a virtual server on the front-end primary router to map the IP address (172.161.2 in this example) of the WAN port of your router and the port number (9090 in this example) set in remote WEB management to the Internet. As shown in the following figure:
Note:Configure the ing rules based on the frontend router interface.
The Internet computer can use the WAN port IP address of your front-end primary router and the external port number set in your virtual server.
Http: // WAN
Port
IP:
PortRemote login and management vro:
Note:If the IP address of the WAN port of your front-end master router changes, you need to log on to the DDNS dynamic domain name on the master router, and then
Http ://
Domain name
:
PortRemote Management of vrouters.
