How does one install centos by using the regeneration dragon copy ?, Shenglong replication centos System

How does one install centos by using the regeneration dragon copy ?, Shenglong replication centos System

1. Set the IP address on your local machine to the same network segment as the IP address on the Huawei server.

Enter the IP address in the browser and enter the address on the server. The following figure is displayed after the address is accessed.

Enter the ip address written on the server and the password of the Huawei server. The logon page is as follows:

In this step, we need to remotely connect to the server on the premise that java is installed locally.

If the preceding operation cannot start a service that remotely connects to the server, perform the following operations.

Download kvm to connect to the server

Download and unzip the package, as shown in. There is a network cable that is inserted in the Management port of the server you have installed, the other end is inserted in the local computer, and click Connect...

At this time, we can see the connection to the server, click the lightning button to power on, power off, restart and other operations, we restart the server...

Press ctrl + r to go to the raid creation page. Select the second one for the next step.

Create a raid, follow the steps shown in the figure, and click OK.

Then we can see that it has been created successfully.

After creating the raid, click force restart server,

Select the previously created regeneration dragon software. The image file in is located in the regeneration dragon software.

Here is a prepared image of 2018-03-17-08-img and the software of the regeneration dragon, Which is framed at the bottom.

After the restart, the following figure is displayed. We can install the system by following the steps in.

In the following figure, select a complete system image (a system has been prepared before, and then package the system into an image, next, we can copy this system to another server. How can we make such an image and write it in the blog ).