After NVR (network hard drive video recorder) and IPC (network camera) are connected to the LAN, Internet users cannot directly access the monitoring videos stored in NVR.
This article describes how to view monitoring videos on the Internet.
Connect NVR to the display and log on to the nvr gui.
1
, Go to the main menu
Right-click
Main menu.
2
Confirm that the IP address and Gateway are correctly configured.
Click
Set, Click
Network Settings
>
Connection,
ModeSelect
Static
IPMake sure that the IP address and Gateway are correctly configured.
Note:If you need to log on to DDNS on NVR
Preferred
DNSAnd
Backup
DNSEnter the DNS of the front-end broadband line (you can
WAN
Port statusView ).
1
Set UPnP to manual
Click
Network Settings
> UPnP, Set
Ing methodSelect
ManualAnd click
Save.
2
Modify external port
As broadband carriers may shield common ports such as 80 and 8080 on broadband channels, we recommend that you change the mapped external port to an uncommon port, such as a port above 9000, this port will be used to access NVR on the Internet later.
Click
Edit, Modify the external port, and click
OK, As follows:
Modify the external ports of HTTP and service ports in turn. The ing relationships after modification are as follows.
The external port of HTTP will be used when accessing the Internet computer.
3
Enable the router's UPnP
Make sure that the frontend router's UPnP is enabled. If not, manually enable it.
Record the WAN port IP address of the egress router or log on to the dynamic domain name of tpddns on NVR, and
IE
BrowserEnter http: // WAN port IP: 9000 or http: // domain name: 9000 to access the nvr web monitoring interface. The following uses the domain name zhangsan.tpddns.cn as an example to describe how to access an internet computer:
Note:Be sure to use IE to access your computer.
