How to add a virtual network card in Win8

The operation of adding a virtual network card to the Win8 system is not the same as that of Windows 7. Many friends do not know how to perform this operation. Today, I will teach you how to create a virtual network card in Win8.

How to add a virtual network card in Win8

Enter the Win8 system and press the shortcut key win + x to open the Device Manager, as shown in figure

After adding the virtual network card, you can see the virtual network card in the network connection.

Otherwise, you cannot see the virtual Nic. If you do not add a virtual Nic, the bearer network cannot be started. The following error is prompted during command operation.

After successful addition, the bearer network can be started.

You do not need to manually set the following IP addresses. If it cannot automatically set an IP address, you can also manually set it. However, devices connected to the wireless network cannot automatically obtain the IP address. You also need to enter it manually. At that time, the gateway must enter the IP address you set.

Now, add the virtual network card in Win8.