How to add network segments to Linux Route-eth0

PC1 and PC2 for the same LAN

The IP of the PC1 network interface named Enp2s0,enp2s0 is 192.168.200.156

The IP of the PC2 network interface named Eth0,eth0 is 192.168.200.157

1) Add a virtual network interface on the PC1

VI ifcfg-enp2s0:0

The value of HWADDR is the hardware address of ENP2S0

ipaddr=192.168.100.100

netmask=255.255.255.0

Bootproto=none

Onboot=yes

Device= "enp2s0:0"

2) Cat/proc/sys/net/ipv4/ip_forward

1

3) Restart the PC1 network

PC2 above

4) VI Route-eth0

192.168.100.0/24 via 192.168.200.156 Dev eth0

Restarting the network will be OK.

This article is from the "12208412" blog, please be sure to keep this source http://12218412.blog.51cto.com/12208412/1875033

How to add network segments to Linux Route-eth0