How to enable win10 System Computer wifi mobile hotspot function, win10wifi

How to enable win10 System Computer wifi mobile hotspot function, win10wifi

In fact, the win10 system has enabled the mobile hotspot function. After the function is enabled, the computer network can be shared to others in the form of wifi. Whether your computer is connected to IOT platform through a wired or WLAN, you can use your wireless network card to share Internet connections with multiple users. The following describes how to enable this function.

First, click the system "start" button to open the Start menu, and then click the "Settings" icon to open the settings menu.

On the settings page, click "network and Internet" to open the network settings page.

On the network settings page, click "mobile hotspot" to go To the hotspot configuration page.

Turn on the mobile hotspot switch to enable the hotspot. Then, devices with wireless NICs can access the wifi signal sent from the computer.

Note that you can select the location of the shared network before enabling the hotspot, because this is the signal obtained by the sharing computer through the wireless network card, so the source is set to WLAN.

Click the edit button to set the Wi-Fi signal name and password. On the displayed page, set the settings and click Save to apply the new settings.

In this case, you can connect the devices to the wireless network, as shown in the connection prompt. You can see that the system supports a maximum of 8 devices to connect at the same time.