Install the system with U disk Win7 is nothing new, the author today with a real case, step by step teach everyone to learn user u disk installation system, understand how to use U disk installed win7 system, follow, taught can also learn to use U disk installation XP, Vista, 2008 operating system. Install Windows system, why should I use a CD-ROM? A USB flash drive can solve all the system installation problems! The following is a detailed use of USB stick Win7 System tutorial, hope to help everyone.
First step: Preparation and precautions before making
1. Download one-touch USB flash drive system software: (Note: computer memory can not be less than 512MB; The capacity of U disk can not be less than 256MB;)
2. Download the win7 system to your hard drive (note that it is not downloaded to a USB flash drive)
The second step: Install a key disk installation system software to make the startup disk
After the installation is complete, double click to open a button software, the picture is as follows: Insert USB stick Click "Refresh" button. Click on the drop-down menu, select your USB drive, click on the "Start Making" button (as shown, 1.2.3 steps)
(Note back up important data before operation)
Wait 2 minutes or so, there will be the following picture of the hint, this time you can pop up your USB flash drive, and then new insert
When you insert it again, you will be prompted to "make a success" and you can use it now.
Note: Because the USB stick system file is hidden, you will find that the U disk space does not change much. Please don't worry about not making a success at this time
In addition to the 3.1 version, the other version after the direct opening of the USB flash drive may be prompted to format the U disk, at this time, do not click OK, you can eject the USB stick to re-insert.
The third step: System file Download and put
Download the ghost system and copy it to your USB drive;
Fourth step: Restart, set the USB as the first boot disk (hint: Please insert the USB flash drive after the boot setting)
There are two common ways to set up:
The first type: Boot direct-start hotkey into the U disk System,
The second type: After booting the BIOS, enter the USB drive system,
The following figure is the BIOS interface:
Fifth Step: Enter the USB flash drive System Boot Menu interface
System recovery in two ways, the first is to recover the system in PE, the second is not directly restored C disk
Today we use the Enter PE recovery system: as shown in the following figure: running WinPE
PE startup, the following interface will appear during the startup process, due to different models of the computer, may take 1-3 minutes to wait, do not worry
If your laptop has a blue screen when you start PE, see why the hard drive works, and if it is AHCI mode, you can turn it into IDE mode. After swapping, you can try to enter PE again.
Sixth step: Enter the windowsPE recovery system
There are many tools in PE
Today I choose a relatively simple tool, with Onekey (one-click Install clone System) for the recovery system
If you need to partition, you can use the Diskgenius graphical partitioning tool
Select the system files you want to recover, (just download the win7 system) and click OK when you are finished, as shown below
Determine if the system is restored, as shown in the following figure: Select Yes
Note: If you use Onekey can not find or open your system files, then please unzip your system files, and then use Onekey to try, remember the system file name, please do not use Chinese name
Restore the system, as shown in the following figure:
Restart the computer after the recovery is complete and reload.
At this point, install the Win7 system with the U-disk! The method for installing XP is the same.
Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 Welcome to join